Drivemax DMX-K-SA | Arcus Technology

Compact size all-in-one NEMA 11 size motor + driver + controller + encoder
RS-485 Communication (9600-115K bps)
Stand-alone control via a BASIC-like programming language
12 to 24 VDC voltage input
Full, 1/2, 1/4, 1/16 microstep
100mA to 1.5A current setting
Opto-isolated +Limit, -Limit, and Home inputs (also configurable as general purpose inputs)
Opto-isolated Digital output
Homing routine using home or limit input
Trapezoidal accel/decel control
Max pulse rate of 50K pps
Built-in 256 counts / rev encoder

Product Summary Chart

Untitled Document

Model	Type	Axis	Motor Size	Driver	Com	Lim/Home	Pul/Dir Ena In	Alarm In	Enc In	Pul/Dir	InPos Out	Alarm Out	Enc	DI/DO	AI
DMX
DMX-K-DRV	M+D	1	11/17/23	16MS/2.5A/24V	DIO	-	x1	-	-	-	-	x1	-	-	-
DMX-A2-DRV	M+D+(E)	1	17/23	500MS/3A/48V	DIO	-	x1	-	-	-	-	x1	Opt	-	-
DMX-J-SA	M+D+C	1	17	16MS/2.0A/24V	USB	x1	-	-	-	-	-	-	-	2/2	-
DMX-K-SA	M+D+C+E	1	17/23	16MS/2.5A/35V	232/485	x1	-	-	-	-	x1	x1	Yes	6/3	-
DMX-K-SA-11	M+D+C+E	1	11	16MS/1.5A/24V	485	x1	-	-	-	-	-	-	Yes	3/1	-
DMX-UMD	M+D+C+E	1	17/23	500MS/3A/48V	USB/485	x1	-	-	-	-	x1	x1	Yes	6/2	-
DMX-ETH	M+D+C+E	1	17/23	500MS/3A/48V	ETH	x1	-	-	-	-	-	-	Yes	2/2	-
ACE
ACE-SXC	C	1	-	-	USB	x1	-	x1	-	x1	-	-	-	3/2	-
ACE-SXE	C	1	-	-	USB/485	x1	-	x1	x1	x1	x1	x1	-	6/2	2
ACE-SDX	D	1	-	500MS/3A/48V	DIO	-	x1	-	-	-	-	x1	-	-	-
ACE-SDC-V3	C+D	1	-				-	-	-	-	-	-	-	6/2	1
ACE-SDE	C+D	1	-	500MS/3A/48V	USB/485	x1	-	x1	x1	-	x1	x1	-	6/2	2
PMX
PMX-4ET-SA	C	4	-	-	ETH	x4	-	x4	x4	x4	-	-	-	8/8	-
PMX-4EX-SA	C	4	-	-	USB/485	x4	-	x4	x4	x4	-	-	-	8/8	8
PMX-4CX-SA	C	4	-	-			-	-	-		-	-	-	4/4	-
PMX-2EX-SA	C	2	-	-	USB	x2	-	-	x2		-	-	-	8/8	2
PMX-2ED-SA	C+D	2	-	2X8MS/1.5A/24V	USB	x2	-	-	x2	-	-	-	-	8/8	2

Untitled Document

M (Motor) / D (Driver) / C (Controller) / E (Encoder)
All Pulse/Dir inputs are differential inputs
Pulse/Dir can be configured as two clock operation (CW/CCW)
All controller versions are standalone
Standard motor stack sizes are double and triple
Encoders are 1000 count encoders except for DMX-K-SA-11with 256 counts/rev encoder
USB supports both 2.0 and 1.1
Ethernet supports 10Mbps