Configurators
DMX-CFG-USB-K117 (K23)
- Configuration Cable for DMX-K-DRV-11/17/23
- USB to 2mm 10pin Female Dual Row (Single Row for -K23 and Dual Row for -K117)
- Used to configure micro-stepping, current, polarity and IO controller settings (Parameters are stored to on-board flash)
- One-time purchase (Does not require one cable per driver)
Submit an inquiry.
DMX-CFG-USB-ACE
- Configuration Cable for ACE-SDX
- USB to .1” Female
- Used to configure micro-stepping, current and polarity settings (Parameters are stored to on-board flash)
- One-time purchase (Does not require one cable per driver)
Submit an inquiry.
|
