Specification (NEMA 11/17/23)

• 12 to 24 VDC Voltage Input
• 100mA to 2.5A support
• Full/Half/Quarter/16 microstep
• Configurable as Driver mode or Controller mode (NEMA 17/23 only)
  
• Driver mode: One clock (Pulse/Dir) or two clock (CW/CCW) support
• Driver mode: 200K maximum pulse rate input
• Controller mode: Absolute, incremental, jogging move type support (NEMA 17/23)
  
• Controller mode: 4 motion profile selection, start/stop input, status output (NEMA 17/23)
  
• Controller mode: 16K maximum pulse rate output speed (NEMA 17/23)
  
• Opto-isolated differential Pulse/Dir inputs (motion profile selector in controller mode)
• Opto-isolated driver enabled input (start/stop input in controller mode)
• Opto-isolated over-temperature alarm output (status output in controller mode)
• Available in NEMA 11, 17, and 23 sizes in double and triple stack lengths
• Software configurable
• Controller mode currently not available on NEMA 11
  

Included Cables/Connectors

• 1 x 10-pin DF11 flying lead cable (1 ft) - NEMA 11/17
• 1 x 10-pin DF3 flying lead cable (1 ft) - NEMA 23
• 1 x 10-pin cable clamp - NEMA 17/23
• 1 x 2-pin 5.08 mm terminal - NEMA 34

Submit an inquiry.

Related Accessories