Configurator cables are used to configure micro-stepping, current, polarity and IO controller settings (Parameters are stored to on-board flash).
This is an one-time purchase (Does not require one cable per driver).
DMX-CFG-USB-K117/23
- Configuration Cable for
DMX-K-DRV-11/17/23 - USB to 2mm 10pin Female Dual Row (Single Row for -K23 and Dual Row for -K117)
- DMX-CFG-USB-K117 Manual
- DMX-CFG-USB-K23 Manual
DMX-CFG-USB-A2
- Configuration Cable for
DMX-A2-DRV-17/23 and
DMX-K-DRV-34 - USB to DB9 Female
- DMX-CFG-USB-A2 Manual
