NEMA 34 Driver | DMX-K-DRV-34

NEMA 34 Driver

Integrated Stepper Motor Microstep Driver + (Controller)

DMX-K-DRV-34

  • Single and Double Stack options available
  • Configurable DIO control or driver mode
  • Pulse/Dir or CW/CCW drive mode
  • 200K maximum pulse rate support

Features:

  • 12 to 55 VDC Voltage Input
  • 100mA to 4.5A support
  • 1/2, 1/8, 1/10, 1/16, 1/20, 1/32, 1/40, 1/64 microstep
  • Configurable as Driver mode or Controller mode
  • Driver mode: One clock (Pulse/Dir) or two clock
  • (CW/CCW) support
  • Driver mode: 90K maximum pulse rate input
  • Controller mode: Absolute, incremental, jogging move type support
  • Controller mode: 4 motion profile selection, start/stop input, status output
  • Controller mode: 16K maximum pulse rate output speed
  • Opto-isolated differential Pulse/Dir inputs (motion profile selector in controller mode)
  • Opto-isolated driver enabled input (start/stop input in controller mode)
  • Opto-isolated over-temperature alarm output (status output in controller mode)
  • Available in NEMA 34 size in single and double stack lengths
  • Software configurable

Included Cables/Connectors:

  • 1 x 2-pin 5.08 mm terminal

Related Accessories

 
 
 

Power Supply 24VDC 6.0A (PSU-150)


Power Supply
24VDC 6.0A
(PSU-150)

DMX-CFG-USB-A2


DMX-K-DRV-34
Configurator
(DMX-CFG-USB-A2)

DB9 flying lead cable for DMX-A2-DRV and DMX-K-DRV-34 (CBL-DB9F-FLD-L3)


DMX-K-DRV-34
DB9 Flying Lead Cable
(CBL-DB9F-FLD-L3)